KOBELION VS/AG series (Large size) | KOBELCO COMPRESSORS, Kobe Steel Group

Features

Specification

Features

High durability & reliability

Optimized internal air flow and thermal pattern by separation of HOT and COOL zone and professional air duct design.
Continuous operation under 46°C ambient condition with more margin against tripping point.

Big touch color monitor

Sophisticated LCD interface enables you to see operation conditions at a glance.

Big touch color monitor

Energy saving logic (AG series)

Automatically unloading if unload/load cycle is longer than setting time (30 seconds) and eliminates unnecessary pressure rise.

Specification

VS series ( Inverter model/[ A ]: Air cooled [ W ]: Water cooled )

Model	Discharge pressure	Discharge air flow		Nominal output	Pipe connection	Fan motor	Lube oil quantity	Noise level	Dimensions (W×D×H)	Weight
Model	MPa	m³/min	cfm	kW	A	kW	L	dB (A)	mm	kg
VS110A/W	0.75	21.4	756	110	80	1.8×2 （0.37)	81	69	2,600× 1,600× 1,850	3,000 （2,900)
VS110A/W-H	0.85	20.2	713
VS110A/W-GH	1.0	18.6	657
VS132A/W	0.75	25.4	897	132	80	3.0×2 （0.37)	81	70	2,600× 1,600× 1,850	3,250 （3,050)
VS132A/W-H	0.85	24.1	851
VS132A/W-GH	1.0	21.4	756
VS160A/W	0.75	30.3	1,070	160	80	3.0×2 （0.55)	98	71	2,600× 1,600× 1,850	3,600 （3,250)
VS160A/W-H	0.85	28.8	1,017							3,600 （3,250)
VS160A/W-GH	1.0	23.8	840							3,500 （3,150)
VS200A/W	0.75	37.3	1,317	200	100	4.0×2 （0.37)	170	73 （72)	3,060× 2,120× 2,150	4,900 （5,000)
VS200A/W-H	0.85	34.2	1,208
VS200A/W-GH	1.0	31.1	1,098
VS250A/W	0.75	43.4	1,533	250	100	4.0×2 （0.37)	195	75 （72)	3,060× 2,120× 2,150	5,300 （5,400)
VS250A/W-H	0.85	41.4	1,462
VS250A/W-GH	1.0	38.6	1,363

Main motor: 4pole, TEFC induction motor, Class F, Inverter drive, Electrical spec: 380/415V, 50Hz
（ ) for water cooled model"

AG series (Fixed speed model/[ A ]: Air cooled [ W ]: Water cooled )

Model	Discharge pressure	Discharge air flow		Nominal output	Pipe connection	Fan motor	Lube oil quantity	Noise level	Dimensions (W×D×H)	Weight
Model	MPa	m³/min	cfm	kW	A	kW	L	dB (A)	mm	kg
AG110A/W	0.75	21.4	756	110	80	1.8×2 （0.37)	81	69	2,600× 1,600× 1,850	2,950 （2,850)
AG110A/W-H	0.85	20.2	713
AG110A/W-GH	1.0	18.6	657
AG132A/W	0.75	25.4	897	132	80	3.0×2 （0.37)	81	70	2,600× 1,600× 1,850	3,150 （2,950)
AG132A/W-H	0.85	24.1	851
AG132A/W-GH	1.0	21.4	756
AG160A/W	0.75	30.3	1,070	160	80	3.0×2 （0.55)	98	71	2,600× 1,600× 1,850	3,500 （3,150)
AG160A/W-H	0.85	28.8	1,017
AG160A/W-GH	1.0	25.8	911
AG200A/W	0.75	37.3	1,317	200	100	4.0×2 （0.37)	170	73 （72)	3,060× 2,120 × 2,150	4,900 （5,000)
AG200A/W-H	0.85	34.2	1,208
AG200A/W-GH	1.0	31.1	1,098
AG250A/W	0.75	43.4	1,533	250	100	4.0×2 （0.37)	195	75 （72)	3,060× 2,120× 2,150	5,300 （5,400)
AG250A/W-H	0.85	41.4	1,462
AG250A/W-GH	1.0	38.6	1,363

Main motor: 4 pole, TEFC induction motor, Class F, Inverter drive, Electrical spec: 380/415V, 50Hz
( ) for water cooled model

* Suction conditions Absolute suction pressure: 1bar, Suction temperature: 20 °C, Humidity: 0%RH
* Discharge air volumes is converted to suction conditions.
* Discharge pressures are measured after gas coolers.
* Air produced by compressors should not be used in respiratory equipment furnishing air for direct inhalation.
* Noise values are based on the height of 1.0m and at the distance of 1.5m in front from the compressor package in anechoic chamber and under full-load operation.
* Since the cooling for the compressed air, lubricant, and the inside of the compressor unit depends on the surrounding air condition, the surrounding air must be properly ventilated to prevent the ambient temperature from rising above 40 °C.
* Specifications and descriptions are subject to change without notice.
* Weight values are based on 380V model.
* Please be sure to use KOBELCO genuine lubricants.